- ALLERGIES AND ASTHMA & AROMATHERAPY?
- Is aromatherapy popular in your area?
- Spray Cans for Airbrushing?
- CARPAL TUNNEL AND OTHER AILMENTS
- HOW TO DO A SET IN 45 TO 60 MINUTES?
- Odorless or uv acrylic whose system do you use?
- HOW TO REMOVE GEL NAILS (But why would you want to?)
- U-V GEL NAIL LIGHTS FOR CURING PRODUCT
- NAIL DRILLS
- NAIL BREAKAGE
E-File Sanitation: Clean Your Bits and Pieces
A brush can be used to remove acrylic dust and other residue from your metal bits.
It’s no more OK to reuse a dirty e-file bit than it is to reuse a hand file. “Cleaning and sanitizing bits is the most overlooked, yet most important procedure when using an electric file,” says Steve Wallace, vice president of sales, marketing & business development for Medicool (www.medicool.com). “You should use the same level of care to keep your bits sanitary as you do for your other professional implements.”
An essential first step is to remove acrylic dust and residue build-up within the grits or flute cuts on your bits. “The bits must be cleaned out periodically to remain sharp. You can use Medicool’s wire brush to do this or soak the bits in a cleaning solution to help dissolve this acrylic material,” says Wallace.
He recommends using the following procedures after each client:
Metal bits: After each use, clean your bits to remove debris from the surface either by washing with a brush and soap and water, or by immersing in acetone for five to 10 minutes. Note that acetone is not a disinfectant; it is a solvent used for cleaning. After cleaning, completely immerse your bits in a liquid disinfectant that is approved for use by your state for the time required on the label.
Silicone bits: Remove the portion of the bit used on your client by holding the bit vertically on the surface of a course file. With the machine on, press down until you’re past the used portion — similar to sharpening a pencil. Completely immerse the bit in an approved disinfectant.
Sanding bands or sleeves: These are single-use, disposable items and cannot be saved or reused. After each use, discard them in a waste receptacle.
Store all bits in a clean, dry container until you are ready to use them.
by Nails Magazine
- NAIL BRACELETS: New trend sees women designing intricate jewellery on their fingernails
- Signature Services: Toasted Coconut Hot chocolate Pedicure
- The 2016 NAHA Finalists Announced!
- New York Salons Must Pay $2 Million in Back Wages
- Why Do Gel Nails Crack? There's A Reason Behind This Annoying Phenomenon
- Face & Body Northern California Adds Nail Pavilion
- Finger lickin’ good — or gross? KFC launches chicken-flavored nail polish in Hong Kong.
- Talking Business: Tami’s Tips & Toes offers relaxing atmosphere
- We Tried Kylie Jenner’s New Nail Polish Collection
- NYC Thief Is Partial to Essie Polish